# Free Towing Inspection Before You Pull a U-Haul Trailer

> Renting a U-Haul trailer or tow dolly? We check your hitch, ball, chains, lights and tongue weight, plus tow vehicle tires and brakes. Call to reserve.

Source: https://goodyearelitetireupland.com/u-haul/towing-inspection/  
Last updated: 2026-09-22  
Business: Goodyear Elite Tire Upland, 1775 W Foothill Blvd, Upland, CA 91786, (909) 608-7699

**TL;DR:** Every U-Haul trailer and dolly rental gets a **free towing inspection**: **hitch and ball**, safety chains, **trailer lights**, tongue weight tips, and an optional tow vehicle tire and brake check.

Our free towing inspection comes with every U-Haul trailer and tow dolly rental. Before you leave, we check the hitch receiver, pin and clip, ball size against the coupler, safety chain attachment, and trailer lights while connected. We explain tongue weight and loading, and we can check your tow vehicle tires and brakes in the same visit.

## What is the free towing inspection?

It is a hands-on check of the connection between your vehicle and the U-Haul equipment you are renting. We do it at pickup, with the trailer or dolly attached, so we are looking at the real setup instead of guessing. It is part of renting a trailer or tow dolly here, not an add-on you have to ask for.

The inspection has three parts:

1. **The hitch connection:** receiver, pin, ball mount, ball and coupler.
2. **The safety systems:** safety chains and the trailer lights.
3. **The tow vehicle:** tires and brakes, if you want us to look.

Since this is a working tire and repair shop, the people doing the check see hitches, tires and brakes every day. That is the difference between a quick glance and a real look.

## What do we check on the hitch and ball?

We start at the receiver and work back to the coupler. A trailer is only as secure as the weakest piece in that chain, and a mismatch is easy to miss when you are in a hurry.

- **Receiver:** mounted solidly, with no cracks, heavy rust or bent tube.
- **Pin and clip:** present, the right size, and fully seated through the ball mount.
- **Ball mount:** a drop or rise that keeps the trailer roughly level when coupled.
- **Ball size:** stamped size matches the coupler on the U-Haul trailer or dolly.
- **Ball nut:** tight, with the ball not spinning or wobbling on the mount.
- **Coupler latch:** closed and locked over the ball, then lifted to prove it holds.

If a part is wrong or worn, we tell you before you load anything. A ball that is too small for the coupler can pop loose over a dip, which is the exact failure this check is meant to prevent. For more on receiver classes and ball sizes, see the [hitch and tow package](https://goodyearelitetireupland.com/u-haul/hitch-tow-package/) page.

## How do we check safety chains and trailer lights?

Safety chains get crossed under the coupler and hooked to the vehicle's chain loops, with enough slack to turn but not so much they drag. Crossed chains form a cradle that can catch the tongue if the coupler ever lets go. We check that the hooks are closed and the loops on your hitch are solid.

For lights, we plug in the trailer and test every function with someone watching from behind:

- Running lights on
- Left turn signal
- Right turn signal
- Brake lights with the pedal pressed

If something does not light, we look at the plug first. Corrosion, a bent pin or a loose ground wire causes most failures. If the problem is in your vehicle's wiring, that becomes repair work. We explain it, write an estimate, and do nothing without your approval. Our [hitch and tow package inspection service](https://goodyearelitetireupland.com/services/hitch-tow-package-inspection/) covers deeper wiring diagnosis.

## What is tongue weight and why does it matter?

Tongue weight is the downward force the loaded trailer puts on your hitch ball. General towing guidance puts it at roughly 10 to 15 percent of the loaded trailer weight. Get it right and the trailer follows quietly. Get it wrong and the whole setup handles badly.

### Too little tongue weight

When too much of the load sits behind the trailer axle, the trailer can start to sway side to side. Sway tends to build at freeway speed and can get out of control fast.

### Too much tongue weight

When the load is piled at the very front, the rear of your vehicle squats, the front lifts, and steering and braking feel lighter than they should. Headlights also aim high at night.

### How to load for good tongue weight

- Put the heaviest items low and just ahead of the trailer axle.
- Keep weight balanced left to right.
- Strap everything so it cannot slide backward under braking.
- Look at your vehicle from the side once loaded. A big rear sag means the load needs to move.

We walk you through this at pickup and look at the stance once you are hooked up.

## Are your tow vehicle tires and brakes ready?

A trailer adds weight your tires and brakes have to handle, on long grades and in summer heat. Because we are a tire and repair shop, we can check both in the same visit instead of sending you somewhere else first.

On tires we look at tread depth, uneven wear, sidewall damage, age and pressure. Tow vehicles often need the higher pressure listed on the door placard for a loaded condition, and your tires need a load rating that suits what you are pulling. Our [tire date code guide](https://goodyearelitetireupland.com/tires/tire-date-code-guide/) explains how to read tire age.

On brakes we look at pad thickness and anything obviously wrong, such as a fluid leak or a scraped rotor. Towing heats brakes far more than daily driving, so thin pads matter more than usual. If something needs work, you get a written estimate split into need and want, and we explain it with photos. See our [brake service](https://goodyearelitetireupland.com/services/brake-service/) page for how brake jobs work here.

NHTSA's [tire safety page](https://www.nhtsa.gov/equipment/tires) covers tire care basics worth reading before you tow.

## What does the 60-second tow dolly demo cover?

If you are renting a tow dolly, we show you how it works before you load your car. It takes about a minute and covers the steps people most often get wrong when they figure it out alone in a parking lot.

1. How to lower the ramps and line up the car straight.
2. Where the front tires should stop against the tire stops.
3. How the tire straps go over the tread and how the ratchets tighten.
4. How to put the towed car in the right gear with the parking brake off, as the dolly instructions require.
5. Why you stop after the first few miles to retighten the straps.

Tire straps loosen as the tire settles, which is normal. The first stop is the one that matters. The [tow dolly](https://goodyearelitetireupland.com/u-haul/tow-dolly/) page has the full walkthrough and explains which cars can ride on a dolly.

## What can you check at home before the inspection?

A few minutes in your driveway the day before makes the pickup check faster and catches problems while there is still time to fix them. None of this replaces the hands-on check here. It just means fewer surprises on the lot.

| Item | What to look for at home | Why it matters |
|---|---|---|
| Tire pressure | Cold pressure compared with the door placard | Low pressure builds heat under a load |
| Tread | Even wear across each tire | Worn tires lose grip when stopping with weight behind |
| Light plug | Green or white crust on the pins | Corrosion is a common cause of dead trailer lights |
| Receiver | Rust, cracks or a loose mount | The receiver carries the whole connection |
| Ball mount | Whether you own one and the size stamped on the ball | Saves a wasted trip if the size is wrong |

If anything on that list looks off, call (909) 608-7699 before pickup day. A corroded plug or a tired tire is easier to sort out on a weekday than an hour before loading. Our [tire pressure and care guide](https://goodyearelitetireupland.com/tires/tire-pressure-care-guide/) explains how to read the door placard.

## What does the towing inspection not promise?

The inspection is a careful check of what we can see and test at pickup. It is not a guarantee that nothing will loosen, wear or fail later. Hitches, straps and wiring can change once you are on the road, and load shifts happen.

You, as the driver, stay responsible for the load and the drive. That means checking the connection again at your first stop, keeping speeds sensible, and watching your mirrors for sway or a flickering light. If something feels wrong, pull over somewhere safe and look. If you are still local, call (909) 608-7699 during business hours and describe what you see.

## What should you check again before the freeway?

Stop within the first few miles, before you merge onto the I-10 or SR-210. A parking lot near Foothill Blvd is fine. This quick recheck catches most problems while they are still easy to fix.

- **Coupler:** latch still closed and pinned.
- **Chains:** still hooked and not dragging.
- **Lights:** have someone confirm turn and brake lights once more.
- **Straps:** on a dolly or auto transport, retighten.
- **Tires:** walk around and look for anything low or bulging.
- **Load:** open the door or check under the tarp for shifted items.

After that, recheck at each fuel or rest stop. On long climbs, like heading up the Cajon Pass on the I-15, give the engine and brakes room. Use a lower gear on the way down rather than riding the brake pedal.

## Needed now versus can wait

### Needed now
- Ball size that does not match the trailer coupler
- Missing or wrong-size hitch pin or clip
- Trailer brake or turn lights that do not work while connected
- Tow vehicle tires with exposed cords, bulges or very low tread
- Brake pads worn to the point of noise or warning

### Can wait
- A ball mount with a better drop so the trailer sits level
- Rear tires that are wearing but still have safe tread
- Brake fluid service that is coming due
- Cleaning light corrosion off the vehicle plug

## Our process

1. **Hook up:** We connect the trailer or dolly to your vehicle on the lot.
2. **Check the hitch:** Receiver, pin and clip, ball mount, ball size and coupler latch get checked by hand.
3. **Test the lights:** We test running, turn and brake lights with the trailer plugged in.
4. **Set the chains:** Safety chains are crossed and hooked with the right slack.
5. **Explain loading:** We explain tongue weight and give the tow dolly demo when it applies.
6. **Check the tow vehicle:** If you want, we look at tires and brakes and give you need versus want in writing.

## What's included

- Receiver and hitch pin check
- Ball size matched to the coupler
- Coupler latch and lift test
- Safety chain crossing and hookup
- Trailer light test while connected
- Tongue weight and load placement tips
- 60-second tow dolly demo on dolly rentals
- Optional tire and brake check on the tow vehicle

## Frequently asked questions

### Is the towing inspection part of the rental, or do I have to ask for it?

It is built into every trailer and tow dolly rental here. You do not book it separately and it is not an add-on. We do it at pickup with the equipment already hooked to your vehicle, so we are looking at your real setup rather than a description of it.

### How much extra time should I allow at pickup for the check?

Plan a few extra minutes beyond a truck-only rental. A tire or brake check on the tow vehicle takes longer than the hitch and light check. If you want one, call (909) 608-7699 ahead so we can plan bay time around your pickup slot.

### What happens if something fails the check at pickup?

We tell you before you load anything. A wrong ball size or a missing pin is often sorted out on the spot. If the fault sits in your vehicle wiring or brakes, we write an estimate and repair nothing without your approval. See the [hitch and tow package inspection](https://goodyearelitetireupland.com/services/hitch-tow-package-inspection/).

### Do I need to bring my own hitch and ball to the rental?

Your vehicle needs a receiver and a ball mount with a ball that matches the trailer coupler. Read the stamped size before pickup day. Call (909) 608-7699 if you are not sure what you have, so a mismatch does not cost you the reservation.

### Can you look at my tow vehicle while the trailer is being hooked up?

Yes. Because this is a working tire and repair shop, tread, tire age, pressure and pad thickness get checked in the same visit. Anything that needs work comes back as a written estimate split into need and want, with photos.

### Do you show me how to load a tow dolly at pickup?

Yes. Dolly rentals include a short demo on the lot: lowering the ramps, lining the car up straight, where the front tires stop, how the straps and ratchets tighten, and why you stop after the first few miles to retighten them.

### Does passing the check at pickup mean nothing will go wrong?

No. It is a careful look at the hitch, chains, lights and tow vehicle at that moment. Straps settle and connections loosen on the road, so recheck within the first few miles and at every fuel stop. You stay responsible for the load and the drive.

## Related pages

- https://goodyearelitetireupland.com/u-haul/hitch-tow-package/
- https://goodyearelitetireupland.com/u-haul/tow-dolly/
- https://goodyearelitetireupland.com/services/hitch-tow-package-inspection/
- https://goodyearelitetireupland.com/services/brake-service/
- https://goodyearelitetireupland.com/contact/phone-email/

---

Call (909) 608-7699 or book at https://goodyearelitetireupland.com/contact/book-appointment/